Coffee maker krups dolce gusto water does not pour out • KLIMATKOMF.RU

For everyone who has used Nescafe Dolce Gusto and after a short time thinks that it is broken. they say the LEVER IS TURNED AND THE COFFEE DOES NOT PREPARE, THE WATER DOES NOT FLOW, and so on.

This is not critical and is very easy to solve, although of course the user is to blame for this, because he himself has repeatedly stepped on this rake.

The first thing you need to do is add water , place the coffee capsule along with the capsule receiver and lower the lever that breaks the capsule down. The horn that holds the capsule should not be there and you should directly see the needle itself for piercing the capsules.
Then, place an empty glass and move the water supply lever to the right. First, a thin stream of water will hit, and after a few seconds steam will come out. As soon as steam comes out, return the lever to the center position.
Actually, why all these simple manipulations... when the coffee machine runs out of water, and you do not have time to top it up, then there is air in the heating element, blocking the further continuation of the process of drawing water from the reservoir. As for the rest, the machine is practically eternal, I have already made thousands of cups at work and no problems. There is practically nothing to break there. Happy coffee drinking everyone and I hope this review was helpful to someone.

Advice from Anton.

Keywords:

But nothing helped me, but as soon as I inserted the horn, steam and water came out. (I cleaned the water supply with a corner before)

The coffee maker has not been used for a long time, turned on, but it does not work. The pump hums, but no water flows. They cleaned it with a needle, but it didn't help. They took the tube and blew it out from the side of the container. One was holding a pipe, while on the other hand they were blowing, taking water into their mouths. It helped, first steam came out, then water.

How to fix the problem yourself?

Coffee machines have a simple and understandable design, so most of the defects can simply be removed with your own hands. If water does not flow into the coffee machine due to a blockage in the filter system, you can descale it and replace very warped tubes. Cleaning the connection between the water tube and the main supply tube can also solve the problem. But if the malfunction is related to problems in the pump itself, then it would be better to show the device to a specialist. The fact is that the piston pump of each coffee machine manufacturer has some differences, and it will be quite difficult to find your specific part in retail sales. And official workshops usually receive spare parts directly from the manufacturer, and therefore they always have the parts needed for repairs in stock. Moreover, the repair of coffee maker parts usually occurs under warranty, which means it will not impact your budget.

Features and benefits

The above-mentioned product is a capsule-type coffee maker and differs from other analogues in the ease of changing capsules, the possibility of manual or automatic dosing of the drink depending on the model, and a very aesthetic design that evokes thoughts of equipment borrowed from spaceships from mind-blowing movies. The big advantages are the relatively small size of the models, ease of operation and reasonable cost. Also, to ensure consumer satisfaction, the coffee maker can prepare coffee to suit any taste. It should be noted that you can only enjoy those drinks produced by the manufacturer. But if we omit this insignificant minus (since the assortment is still very large), you only need to have a suitable capsule and you can enjoy cappuccino, latte, macchiato, several types of espresso and other drinks if desired. The device can even prepare Nesquik and tea.

But with all this, it is necessary to emphasize that with the variety of drinks, it is not designed “for flow”, but for a family of several people, the volume that the manufacturer implies (the largest is 1.3 liters) may be completely sufficient. Those who like to drink coffee from huge mugs may face a problem, which is that one pour of water yields several cups of 100 ml each. And if you try to increase the volume of water, the coffee will come out very diluted. When milk is added, the taste of the drink becomes completely unacceptable.

There is no water coming out of the capsule coffee machine

For everyone who has used Nescafe Dolce Gusto and after a short time thinks that it is broken. They say the lever is TURNED AND THE COFFEE DOES NOT PREPARE, THE WATER DOES NOT FLOW, and so on.

This is not critical and is not at all difficult to solve, although of course the user will be to blame for this, because he himself has stepped on this rake more than once.

But nothing helped me, but as soon as I stuck the horn in, steam and water came out. (I previously cleaned the water supply with a corner)

The coffee maker has not been used for a long time, turned on, but it does not work. The pump hums, but no water flows. They cleaned it with a needle, but it didn't help. They took the tube and blew it out from the side of the container. One was holding a pipe, while on the other hand they were blowing, taking water into their mouths. It helped, at first steam came out, then water.

What to do if the lever does not lock, but water flows?

He took out the horn for the capsule, lowered the lever, turned it on, drops of water slowly collected from the needle, and silence, stuck an ordinary needle into the needle, where the water should come from, and began to turn, a cloudy mixture came out of the needle, and soon steam shot out. Now everything works without any problems.

The capsule coffee machine in the home kitchen has not amazed anyone for a long time. This small-sized, massive device can amuse us once a day with the freshest espresso or a soft tonic lungo, and it becomes very sad if one beautiful day it stops working: it doesn’t turn on, doesn’t respond to button presses, or dumps dry coffee instead of a fragrant drink into the cup. But, even if the capsule coffee machine does not draw water, do not rush to find a replacement. Maybe it will just take some cleaning.

Principle of operation

Taking care of maximum automation, the manufacturer has created a line of coffee machines that operate on the basis of capsule action. In order to prepare a drink for yourself, you need to buy a special capsule, which will be discussed below. So, first, cold purified water, preferably bottled, is poured into the container. The coffee capsule must be placed in a special slot, which clamps the impenetrable capsule using a lever. After selecting the cooking program, the coating is pierced with a needle, after which boiling water passes through the film.

In all Dolce Gusto units, the operating principle is the same, but depending on the model, additional individual modes may appear that significantly expand the functionality of the device. Coffee machines easily cope with many tasks, for example, if you need to add milk or cream to a drink, you just need to remove the coffee capsule and replace it with milk

After a minimum of time, the coffee will be ready, and the owner will only need to remove and throw away the used packaging. It is important that you do not need to clean or wash the device.

Why the coffee machine does not draw water - reasons

All capsule-type coffee machines have a similar structure and usually consist of the following components:

electrical control unit;
filter systems;
water tank;
heating element;
piston pump.

READ What is a French press coffee maker

This whole system is very closely interconnected, and if any part fails, then the entire coffee machine can no longer work fully. If water is not supplied to the coffee machine, there may be several circumstances:

The piston pump is faulty.
The connection between the water tank and the supply pipe is clogged.
Scale deposits inside the coffee maker supply pipe system.

Typically, a piston pump does not fail overnight, and small problems often become noticeable long before the failure occurs. If your regular coffee tastes thinner, is lighter in color, or is brewing even slower than usual, these could all indicate a possible problem.

Coffee maker won't turn on

Initially, it is worth checking whether everything is in order with the food. See if the cable is broken, check the grounding.
It also happens that household coffee machines produced in the Middle Kingdom simply lose contacts (they come off). Such cases also occurred with more famous brands: zauber, melitta, trevi. It is enough to check all the wire connections with the control circuit.
A common case with Senseo¸Siemens and Ufesa machines is that they have low-quality thermostats built into them. To diagnose it, you need to remove one wire from its end and “ring” the contacts with a tester. If all is well, the circuit will be closed.
The heating element may also fail. Diagnostics is carried out similarly to a thermostat. Replacing it with a new one is difficult; it will be easier to try to repair or buy a new coffee machine.
Very often, on the shelves next to the coffee machine, all the necessary accessories that you will certainly need for the correct operation of the device are sold. And to clean parts, technicians are advised to buy special flexible brushes.

Advice:

Dolce Gusto

If the water in your Dolce coffee machine does not flow thickly, check the system for blockages. The problem can manifest itself either in the form of a decrease in pressure or in the complete absence of incoming water. The root of the problem lies in the poor quality of water (it can be very heavy, which becomes a prerequisite for scale), residues of coffee or coffee fat.

If you recently completely cleaned the device, then most likely it’s a matter of scale. Descale the machine using special detergents. To get rid of other types of contaminants, it is necessary to carefully clean all the components. Wipe the strainer with a stiff brush, wash the filter, and also use a toothpick to remove traces of dirt from the tubes and holes.

IS THERE NO WATER COMING INTO THE COFFEE MAKER? WE CLEAN SIMPLY!

How to use capsules?

According to the instructions for use, Dolce Gusto coffee capsules must be inserted into a special receiving unit located inside the coffee machine body. You also need to fill the tank with fresh drinking water. The drink supply head must be closed using a capsule holder equipped with a special magnet. Do not open it while the coffee machine is running.

Then simply press the start button and wait for the drink to be prepared. Do not move the lever upward until the on/off switch stops flashing.

The tray and container created for capsules require daily cleaning with a soft brush. After using the machine, you must remove the capsule and clean the holder head.

HOW TO REfill DOLCE GUSTO CAPSULE. Dolce Gusto Nescafe coffee refill.

HOW TO FILL A DOLCE GUSTO CAPSULE with your own hands? Abstract Dressing with Dolce Gusto Nescafe coffee. How to refill a Dolce Gusto Capsule.

Take two capsules of Dolce Gusto that have already been applied. Cut off the bottom of one capsule. Shake out the used coffee without damaging the membrane. On another capsule, cut off the top cap and remove the membrane. Wash both parts of the capsules with water. Dry the capsules. Fill a capsule without a bottom with ground coffee. Be careful with the membrane. Cover with a circle of foil. Place a plastic labyrinth on top. Connect both halves of the capsules. Now you can insert the reconstituted capsule into the Dolce Gusto coffee machine.

********** Useful videos from Domovoy. Reviews, discussions, useful ideas about everyday life, life and the people who surround us.

A channel about life without embellishment and without glamor. https://www.youtube.com/c/bsubm2009best

Brownie - housework and housekeeping https://www.youtube.com/playlist?list=PLjGYLaeyUrEN4GS0SwObGBOwD3ZjFiyng

Ordinary food - ordinary recipes for making food https://www.youtube.com/playlist?list=PLjGYLaeyUrEMT07_Rt1mSXWRPdwNKhGVi

Ordinary programs - about programs and computers in an easily accessible language https://www.youtube.com/playlist?list=PLjGYLaeyUrEPbnFYK_5hA3C_YpMOnZovd

The composition “Macaroon 5” belongs to the artist Audionautix. License: Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/). Artist: https://audionautix.com/

Video HOW TO REFILL DOLCE GUSTO CAPSULE. Dolce Gusto Nescafe coffee refill on Domovoi channel about life without glamor

Nescafe Dolce Gusto Piccolo.

Krups

In the case of the Krups , in most cases it is the electronics that fail. It happens that she simply refuses over time. It is also worth considering the human factor. Remember if you spilled some of the drink on the screen or on those parts of the device through which liquid could get into the electrical circuit.

You can verify this only with the help of an ampere-voltmeter, which not every home has. Therefore, if water does not flow into the Krups , and complete cleaning does not help, it is better to leave it in experienced hands or contact a service center.

Descaling Krups KP 1002 (1006/1009) Nescafe Dolce Gusto

Please note that this is not a repair - it is an ongoing maintenance procedure for the coffee machine. Scale is actively depositing in the coffee machine. Therefore, it needs to be removed from time to time so that the coffee maker does not become clogged or break. Descaling is painfully simple. We dilute two teaspoons of citric acid (available at any grocery store) in a glass of water. Pour into the coffee machine reservoir. We don’t install the capsule. And in the same mode as preparing coffee, we run this solution through Nescafe Dolce Gusto. We repeat the function twice.

To prevent the taste of citric acid from being felt in the coffee later after cleaning, fill a full tank of clean water and run the Krups KP 1002 (1006/1009) again in the coffee making mode.

That's it, congratulations. Cleaning and repairs are complete. The coffee machine pumps water again and pours coffee. Unfortunately, this will not stop water leaking from it, no matter how annoying it may sound, this is another problem. Yes, the most important thing is to put the useful wire back in place so that it doesn’t get lost?

Fundamentally! If you suddenly notice that over time your coffee machine has become slower in making coffee, this means that the tube is again becoming clogged with scale. Clean again and the problem will disappear.

Yes, one last thing, do not try to reuse capsules that have already been punctured. The machine won't make coffee out of them. Install the latest capsule and the coffee maker will work properly.

Krups coffee machine repair.

Krups coffee machine repair. The coffee machine does not form a dry pill and still leaks. Water gets into the container where the pill is thrown. In this video review we will disassemble and repair this breakdown. We will replace the sealing rings on the piston and clean the inside of the coffee machine. Complete disassembly and reassembly. #coffee machine_krups #Coffee machine_repair #krups ************************************************ *************** Our website https://stiralservis.ru ******************************** ******************************* VK group https://vk.com/stiralservis_vk ******* ************************************************* Group on facebook https://www.facebook.com/groups/stiralservis *********************************** ********************* Group in Ok https://ok.ru/group/53423198699700 *************** ***************************************** Twitter https://twitter.com/ stiralservis

Video Repair of Krups coffee machine from Stiral Servis channel

DeLonghi

The reason that water does not flow into the DeLonghi coffee machine can be the same scale or other contaminants. Use an anti-scale agent or clean the device using the products at hand (brush, toothpick). The tubes in this model should be cleaned especially carefully, because they simply get scratched. Try to prevent this, because later even more fat or scale will settle in the uneven areas. You will have to clean your coffee machine much more often.

Main causes of malfunction

In most cases, people who contact the service with a problem with coffee machines leaking are unpleasantly surprised that they themselves are to blame for the resulting malfunction. Most breakdowns occur due to violations of operating rules, consisting of prolonged and improper use, neglect of cleaning, and the use of “poor” quality water.

Important! Also, the operation of the device may be affected by improper transportation conditions in the cold season, when too low a temperature contributes to the breakdown of metal and plastic parts of the mechanism.

In addition, water may leak from under the coffee machine or coffee holder (holder) of Delonghi, Krups or Saeco due to:

wear of seals;
damage to the water storage tank;
failure of gaskets;
lime deposits (scale);
damage or loose fit of silicone tubes;
breakdowns of plastic or aluminum (steel) mechanism components;
clogging of the ground coffee successor;
breakdown of the heating boiler;
damage to adapters.

Questions and answers

Dolce Gusto's development provides the best temperature for perfect coffee. If you increase the temperature of the drink, the ground coffee will have a burnt taste.

For those who prefer their coffee hotter, there are several options: • Preheat your cup ahead of time. • Be sure to wait until the indicator stops flashing while the thermoblock is heating before preparing your drink. • Before installing the capsule, pour a little water from the machine into the cup, pour it out, then install the capsule and prepare the drink. • If scale appears in the machine, remove it (if you only noticed a decrease in the temperature of drinks recently).

The usual temperature of the drink in a cup: • Capsules with roasted and ground coffee: above 70 C° • Capsules with instant coffee: above 65 C°

If you have just purchased a coffee machine and are about to use it for the first time, read the instruction manual. Operating instructions for all machines can be found on our website.

Here are some tips for good use that will be helpful for you: 1. Fill the water tank. 2. Install it into the machine and lock it until it clicks. 3. Turn on the machine and wait until the indicator turns greenish. 4. Before first use, the machine must be cleaned. To do this, select the largest amount of water, place an empty container under the drink outlet, press “Cold water” (blue button) and wait until all the water flows out. Repeat the process in the “Hot water” position (reddish button). Your machine is now ready to use. 5. Fill the water tank. 6. Insert the capsule into the holder. 7. Select the desired water level (the volume of water is indicated on the capsules). 8. Select “Cold/Hot water” depending on the drink you want. 9. Wait until the indicator turns green before removing the capsule. 10. Throw away the used capsule.

The main factors due to which coffee does not come out of the coffee machine

The coffee machine is built quite easily and firmly. But often users of DeLonghi, Vitek or Dolce Gusto contact the workshop because coffee is not flowing from the coffee machine. Almost always, this situation is caused by a lack of timely maintenance of equipment. If you use the mechanism for making a hot drink exactly as indicated in the instructions for use and follow all the care tips, then it will be in working condition for a long time. What can lead to a situation where the machine does not pour coffee:

Filters clogged.
Scale.
Pump failure.
Malfunction of the float or its sensor.
The type of grinding of grains is incorrectly selected.

Next, let's look at each reason more carefully.

Pump fault

A piston pump is needed in a coffee machine to supply and press liquid through a compressed coffee pill. If, while the device is operating, you hear an unusual sound and the unit begins to dispense the drink drop by drop, the pump is broken. One of the reasons for the breakdown may be the accumulation of scale. The decalcification procedure will help correct the situation. If this does not help, then you need to contact the service. You should not disassemble the equipment yourself, this can lead to even greater damage.

Filters are clogged

Modern coffee machines from Nespresso, Krups , etc. are equipped with special filter elements. Thus, manufacturers took care to protect equipment from limescale deposits on internal parts and prevent foreign substances from getting into the drink. Filter elements must be replaced after a certain period of operation of the device. Each specific model has its own periods. More details about this can be found in the annotations or on the manufacturer’s website.

If you ignore advice on replacing cartridges, adjacent parts, for example, the pump, may break. If the filter is clogged, the pump will have to work at full capacity to force water through the filter. At critical load, its service life is sharply reduced. The pump may simply burn out.

Advantages and disadvantages

Over the course of a couple of years, Nescafe Dolce Gusto devices have gained high popularity among coffee lovers, the reason for this being a whole set of undeniable advantages that the coffee machine has. To begin with, it is worth noting that the manufacturer took care of the customers and created a fully automated unit. Special coffee preparation modes are ensured by the ease of use of the device; you can easily understand how to operate it by reading the instructions or watching a couple of thematic videos.

The device also has a high level of safety - when using it, it is simply impossible to get burned, since the section where the capsule is located is removable, and it has become easy to remove the capsule from the coffee machine without the risk of getting a burn. As you can see, practicality is the main characteristic of units of this brand, because the mug stand is also a container for drips.

However, the most important and, one might say, key feature of the coffee machine is the fact that there is no need to periodically clean the equipment from coffee residues and household waste. This is due to the fact that disposable airtight capsules are used in the preparation of the drink. After serving the drink, it is thrown away. Thanks to this quality, the coffee machine will be convenient for both the office and home.

The neat, modern and stylish design of the device also makes a pleasant impression, allowing it to fit into any kitchen interior. Moreover, it is very compact, so it will not take up much space in the dining area, but will appeal to all coffee lovers due to its small dimensions, the quality of the coffee produced, speed and quiet operation.

The great news is that Dolce Gusto household appliances support not only the preparation of coffee, but also other drinks - cocoa and tea. In addition, their strength can be easily adjusted. Along with multiple advantages in the form of ease of operation, speed of operation, fashionable design, there is another criterion that plays a big role in the choice of household appliances - price. It is very affordable and starts from 5,000 rubles, which is not so much for a coffee machine, especially when compared with analogues from other brands.

However, there are also negative aspects to this technique. They are not so numerous, but very significant, so it is impossible not to highlight them. Because Dolce Gusto is not a professional unit for preparing drinks, but is aimed at the so-called mass market.

This leads to the first obvious disadvantage of the device: the quality of the coffee is somewhat lower than that from a professional coffee machine. We can say that this is a matter of taste, but many users noted this.

The inability to brew coffee from other manufacturers is perhaps the main complaint of buyers, since by buying only what the Nescafe Dolce Gusto brand offers, people become limited in the choice of drinks. This characteristic trick of marketers, aimed at actually forcing people to buy products from a certain company, has long gained popularity among manufacturers and is specific to most of them.
Here you can also add the considerable cost of the capsules. For the sake of fairness, we note that these capsules still provide a decent taste.

The last significant drawback is the small volume, which allows you to prepare a couple of small cups in one. Of course, this is inconvenient, the only way to try to solve this is to add more water, but this will lead to the coffee turning out diluted. It’s unlikely to be tasty, so there are big doubts that such a coffee machine is suitable for lovers of a strong drink.

Coffee machine does not dispense coffee

It’s a nasty situation when you are about to drink espresso, the coffee machine hums, but no coffee is poured. Surely, almost every coffee machine user has at least once encountered a similar phenomenon. Maybe it will be possible to fix the problem without the help of others. And if not, you need to turn to experts, especially if you yourself do not have the appropriate experience and equipment.

Degree of grain grinding

If you recently started using a coffee machine and found that no coffee comes out of the machine, then maybe you chose a very small grind of the beans. The motor is simply not able to push through a coffee pill, especially if the type of bean is also quite fatty.

The most common solution would be to change the degree of grinding of the grains to a coarser one.

What should the temperature of the drink be?

The canonical espresso machine prepares with water whose temperature is more than 90 degrees.
This is how the drink will get all the taste and smell, taking it from the ground grain. If you drink coffee that is not as hot as you would like, the reason may lie in trifles, for example, in the use of cool utensils. Before making the drink, it is better to warm the cup at least under running hot water. The second point is incorrect technical options.

To check this, do the following:

go to the menu;
find “drink temperature parameters”;
set the value to the maximum (turn the rotary knob or press the corresponding button repeatedly).

3rd “little thing” – the temperature is influenced by the condition of the brewing device. If it is not heated, the coffee will not be as hot. If you just turned on the device, warm up the system by running a portion of the drink.

Why doesn't my coffee machine dispense water?

A more common malfunction of the device is the situation when the coffee machine does not supply water. This breakdown can be caused by many reasons, including careless handling of the device. The most common reasons for the lack of water supply to the nozzles are a dirty filter and failure of the float sensor. If the coffee machine does not supply hot water, then in this case only comprehensive diagnostics will help.

The float sensor may be filled with water or clogged with foreign particles. One of the reasons why the coffee machine does not see and does not supply water is the supply of very hot water to the reservoir. There is really no need to do this, because in this situation the air is released from the float, and when the water cools, a vacuum appears. It then sucks liquid into the sensor.

Common problems and solutions

There is no point in being tied to certain models of coffee machines. Each brand and model has its own characteristics, and repairing a specific coffee machine may have unique steps. For example, Gaggia Syncrony Logic machines use strictly roasted coffee beans, and a number of problems are associated with their lack of quality. Delonghi repairs in most cases are due to the use of unfiltered water and the lack of repeated decalcification procedures. From time to time, Krups capsules get stuck tightly in the supply path. Therefore, it is worth considering typical faults common to all coffee machines.

The car won't start

First, you should check the condition of the power cord, look for fraying, the presence of areas of sharp bending, or breaks. If damage or suspicion of its presence is discovered, it is worth changing the power cable.

Water is leaking in the horn area

Due to calcination, the O-ring no longer provides a tight seal. It is worth unscrewing the horn and washing the rubber part with special means to remove calcium deposits. If the ring has lost its elasticity or cracks, it needs to be replaced.

The device does not start

Errors on the screen and incomprehensible behavior during initial startup can be caused by clogged contact groups. If the car is equipped with a push-button remote control, you should try to carefully remove the decorative panel with a narrow screwdriver and check the condition, clean it with alcohol, and clean it if the plates are open to access.

In cases where the machine is controlled by a touch panel, you should contact a service center; difficulties may arise both in the control unit and in the multilayer contact group itself.

The reason that the device does not start and displays an error may be that one of the sensors is dirty. If a certain model of machine allows complete disassembly and access for cleaning, it is worth doing this; decalcification using special means will also not hurt.

Coffee is not brewed properly

A whole group of circumstances (decreased water flow, strange sounds, hissing, dose violation) is associated with the accumulation of contaminants and calcification. The first step is to run the water through the cappuccino maker. This eliminates air pockets. If this does not help, it is recommended to carry out decalcification with the following cleaning of the mesh with a stiff brush, the tubes with a needle, removing all blockages, coffee residues and grease. But the reason may also be the failure of the pump - then specialist intervention will be needed, it is worth contacting the service for a replacement.

No coffee grind

The coffee machine is disassembled, all clogs in the mill are removed using a vacuum cleaner and a brush, after which the device is assembled and set to the highest grinding dose mode. To control and completely remove residual contaminants, it is worth boiling several cups, then set the machine to normal mode. If this doesn’t help, it’s best to contact a specialist; maybe the problem is mechanical damage to parts of the mill structure.

There are difficulties that will require replacing individual parts to eliminate them. If you have the necessary technical abilities, you can do this at home - for most modern coffee machines, spare parts can be found in stores, on the market, and in service centers. But if water appears under the device, and you simply don’t have the skills to disassemble, replace tubes and check the density, you should immediately disconnect the device from the network and call a specialist.

Repair of Delonghi, Saeco, Krups coffee makers.

Any electronic device can fail over time. Repairing coffee makers from Delonghi, Saeco or Krups is quite easy to do yourself. This kitchen home appliance is considered one of the easiest to repair and operate.

Float sensor failure

If you poured water into the tank, but there is no water, and the coffee machine does not respond to it, then, usually, the problem lies in the failure of the float sensor. You can check whether this sensor is working using the following method:

READ What is the difference between coffee makers and satellite

The KRUPS capsule coffee maker does not water or clean the needle. Dolce Gusto

see if a float appears on the surface of the tank;

If the float does not float up, then you need to clean the float workplace.

Only in rare cases does a float actually need to be repaired. Most often it needs to be replaced. If you decide to replace the float yourself, then you should take a responsible approach to choosing a similar float. If you want to protect yourself from these problems, then feel free to call a specialist.

COMMENTARE • 25

dolce gusto The green indicator does not light up

Yoly fell. And I'm still using a needle.. THANK YOU!

I pulled it out, now I can’t plug it in ((((((((

Thank you, I’m drinking coffee again thanks to you!

thank you very much, I cleaned it and it worked, it's great to clean with a pin

What do you think, what if you pour citric acid into the tank and turn it on to pump the largest volume of water? The fact is that citric acid removes scale in teapots, maybe it will help?

If the needle is completely clogged, it will not help.

The engine has stopped running, water is not flowing, how can I fix it?

Disassemble and look at the pump

Thank you. Although there were no difficulties with the needle, I did clean the elastic band itself. There was also a lot of coffee residue, etc. on it. Well, some people have bad luck with logic. They got it, and then what?)) how to clean it? It would be nice to see the whole process.

Coffee machine KRUPS KP 1006 NESCAFE® Dolce Gusto Piccolo, review.

What to do if the coffee machine does not pump water and the filter is clogged?

The filter should be selected based on the type of coffee machine, and there are a lot of them. For example, capsule, grain, professional and others. The coffee machine should only be cleaned by a specialist. To replace the filter, you must select the correct filter. A situation where water does not flow may be caused by exposure to constant steam, which can damage plastic parts. The technician can repair the coffee machine at home, as well as carry out all the necessary preventive maintenance.

Housing tightness

If the device leaks as a result of a leak, the damaged gaskets should be replaced. Moreover, most manufacturers recommend performing preventative maintenance associated with replacing seals at least once a year.

If the cause of leaks is a breakdown of the internal pipe system, pump or Tubular Heater, it is problematic to solve the problem yourself - contact a specialized Service Center, where the breakdown will be eliminated quickly, efficiently, and professionally.

Checking the tank for integrity

To understand that the cause of the leak is a damaged tank, you need to pour water into it, wipe the outer part dry, and place the container on a dry towel or napkin. Leave the tank in this position for about 60 minutes, and if the towel gets wet, the tank will need to be replaced.

The brew group is clogged

Rinse the brewing group under running warm water and clean the filter element. The area behind the brew group, where the drainage pipe is located, also needs cleaning. You can use a brush for the procedure.

Call the master

Submitting a request for professional repairs is very simple. fill out the online form or call:

"A-Iceberg" - 27 years with you. 5,700,000 repairs completed.

A coffee machine, like other equipment, may stop functioning correctly as a result of malfunctions caused by natural wear and tear of parts or improper operation. One of the most common breakdowns is water leakage, which causes owners many problems.

Do-it-yourself coffee machine and coffee maker repair: review and repair of faults

Why do you need a good and high-quality coffee machine? Of course, for aromatic hot coffee in the morning. The process of brewing this wonderful drink is almost completely automated and requires minimal human intervention. The filling of the device implies the presence of many mechanical parts, electronic circuits, as well as a miniature hydraulic system. However, everything soon breaks down and these necessary devices are no exception. When coffee machines break down, there are only two options left: take them to a service center or repair the coffee machine yourself.

The main problems of coffee machines and coffee makers

The water supply is interrupted. There is a blockage in the mechanism pipeline;
The coffee has acquired an unusual smell or taste. In this case, you don’t always need to fix something yourself. Perhaps you just need to change the coffee tablets, and there is a very wide choice of them: Dolce Gusto - Dolce Gusto, Nestle, Jacobs, etc. Alternatively, the coffee machine filter may become clogged. Another factor affecting the taste and smell of coffee can be cheap plastic. During operation, some parts of the machine heat up to 130 degrees, which can cause the plastic to melt;
Cold coffee. Most likely, your heating element has stopped working;
The carob coffee maker does not work. This can be influenced by many factors: the motor is broken, the pump is not working, the power cable is broken;
The dosage of water has been exceeded (most often found in capsule coffee machines). Most likely, the breakdown lies in the engine or in the timer operating circuit.
The cooking time setting circuit does not work or the dosage per cup is incorrectly adjusted. Of course, you need to focus on the model of the device and its brand, but a common reason is the incorrect operation of the engine control circuit or one of its compartments.

If you are not sure that you can repair a coffee machine, then it is better to take it to specialists. If the device is under warranty, then there is no point in disassembling it at all; it will instantly lose the warranty.

Why is water leaking from the coffee machine?

The device body is equipped with seals made of silicone or rubber. The cause of leakage may be their wear.

The coffee receptacle is clogged with excess product.

If your new car is leaking, pay attention to the condition of the metal and plastic components. Thus, as a result of careless transportation, filter elements or tubes may crack.

Contact the Service Center, where worn components will be replaced

The water flask is damaged, the gasket connecting the container to the body is cracked

Damaged components need to be replaced

Scale has accumulated in the machine, which is deposited on the walls of the tubes, which can damage plastic parts

It is recommended to eliminate any damage at the stage of its occurrence, since water can negatively affect the electronic components of the coffee machine, and the equipment will completely fail.

Typical faults and methods for their elimination

Currently, there is a wide range of kitchen appliances for making coffee. However, given the complexity of structures and the variety of models, determining the nature of the failure is often quite difficult. Therefore, we will consider the most common device problems.

Typical malfunctions of coffee makers.

The finished drink contains coffee particles. As a rule, this problem occurs when the filter mesh is damaged. At the same time, small fractions of coffee begin to seep into the finished product. Replacing a damaged filter will help restore proper operation of the device.
There is no hot water flowing into the brewer unit of the coffee maker. This problem often occurs due to clogging of one of the tubes of the device.

Aluminum heating elements clog most often.

To eliminate the problem, you should rinse the unit in a solution with the addition of a few drops of acetic acid. This procedure must be carried out until the liquid begins to flow into the brewing unit in a strong flow.

Coffee drink gets on the base heating plate. Typically, there is a shut-off valve installed at the outlet of the filter holder. This element, when placing the jug on the heating plate, prevents the finished drink from flowing out. However, if it is absent, the shut-off valve, unable to withstand the increased pressure, begins to leak liquid onto the base of the device.

If this problem is detected, you should immediately disconnect the coffee maker from the power supply. Then, use paper towels to dry the base plate. After this, the device should not be turned on for 2-3 hours.

Remember, insufficient drying of the unit can lead to insulation breakdown and electric shock.

However, if after performing these manipulations the leak could not be eliminated, most likely the problem occurred in the shut-off valve. In this case, the damaged element should be replaced.

Water leak. The cause of this malfunction is often the formation of a crack or disconnection of the fluid supply hose. To access the flexible supply, disconnect the device from the power supply, and then remove the screws securing the base cover. After this, inspect the hose for cracks, and also check that it is correctly secured to the heater nozzles. In this case, all damaged elements are replaced.

If there is a leak at the junction of the inlet and the boiler, then the connection should be tightened.

Remember, after repairing a coffee maker, it is imperative to test the system for leaks. To do this, the kitchen appliance must first be filled with water and placed on a paper napkin. If water droplets appear on the paper, you should contact a service center for help.

Reducing the flow of escaping liquid. This problem occurs when the filter element is clogged with coffee particles and scale. At the same time, during operation of the device, an unusual whistle and hissing appears. To restore proper operation of the unit, the filter must be thoroughly cleaned. Namely: decalcification and washing of meshes. You can also use a coffee grease remover when cleaning the grate.

However, if cleaning the filter system does not bring the desired effect, most likely the problem has occurred in the pump pump. In this case, the worn-out element of the system should be replaced.

Lack of “reaction” when pressing buttons. To identify a malfunction, you should first check the presence of ingredients in the compartments, as well as the correct installation of the control knobs. Then you can dismantle the front panel of the device and clean the stuck start keys. If the malfunction could not be eliminated, then the breakdown may have occurred in the electronic unit or control panel. In this case, you should contact the service center.
The cappuccino maker does not work. This element exists in two versions: manual and automatic. However, regardless of the type of mechanism, the cause of the breakdown is often identical. Namely: steam passes through the nozzle, but the milk does not froth. As a rule, the cause of this problem is a clogged cappuccinatore.

Water is leaking from the coffee machine

How to clean scale?

Most modern coffee machines are equipped with an automatic descaling function; if your equipment does not have such an option, you should:

purchase a special product designed to remove scale
take the advice from the instructions, dilute the product with water and pour it into the container of the coffee machine
drain a small amount of water
turn on the machine and leave it running for a while
turn off the equipment, wait a quarter of an hour
turn the device back on
fill the container with clean water to flush the system - this step should be performed several times to get rid of any remaining product

Preventative maintenance of the coffee machine

The Intesa RKM service provides for the possibility of ongoing cooperation. The client can enter into an agreement with the company for regular preventive checks of Dolce Gusto devices. This is an advantageous offer for office coffee machines, which are subject to greater wear and tear due to the number of users. Ordering one-time prophylaxis for home appliances is a completely natural consumer decision. In any case, this difficult and important procedure can only be entrusted to professionals.

Stages of preventive work:

comprehensive diagnostics of the work system;
thorough cleaning of all parts of the mechanism;
washing and purging of water and beverage supply systems;
setting basic parameters;
cleaning the housing from dirt.

What to do if water is leaking from under the coffee machine?

If you discover that the device is leaking, you should immediately take appropriate measures. Was the leak caused by the O-ring? This area should be washed and a new gasket installed.

Another reason is an overfilled tray. It may have filled up while preparing a drink or descaling the device. To avoid similar situations in the future, make sure that:

Repair of Krups Nescafe Dolce Gusto coffee maker. (Why doesn't the water come out?)

The device is installed on a flat surface, otherwise the tray full indicator information may not be transmitted correctly
Before preparing a drink, make sure that the filling indicator does not turn on. If the lamp is on, you need to pour out the excess water.
Before descaling your device, make sure that the drip tray is not full of liquid.

Sources:

https://kofeinyi.ru/ispolzovanie/kofemashine-idet-voda https://remontano.ru/stati/kofemashiny/ne-techet-kofe-pochemu/ https://coffeservice.ru/kofemashina-ne-podaet-vodu / https://iceberg.ru/services/remont_na_domu/kofemashiny/tipovye_neispravnosti/techet_voda_iz_kofemashiny/

How to use?

The principle of using the device is simple and understandable even to a person far from technical sophistication. The capsule is inserted into the tray, then the handle is turned on and the water supply is turned off. To make dark coffee you need one capsule, to which you can add another one with dry milk if desired. And after a few minutes of waiting, you can enjoy an invigorating drink. The product is accompanied by a detailed annotation in the form of pictures, which describes the procedure step by step and clearly.

The manufacturer Krups Nescafe Dolce Gusto presents a number of types of coffee makers: Piccolo-Genio, Melodi, Circolo, Mini Me, Oblo. The first thing you notice is the very significant difference in design. Any model is presented in several colors, and for the most demanding ones there is even a limited edition Genio 2 Billy The Artist. The design is made in pop art style.

Regardless of the chosen model, the manufacturer provides a two-year warranty, promises silent operation and introduces an energy saving function (the device turns off after a certain time).

In addition to color schemes and other design delights, models differ in weight, cost and water tank capacity. The Piccolo-Genio model has the lowest parameters, which weighs around 2.5 kilograms and holds a water volume of only 0.6 liters. With all this, it turns out that the Mini Me coffee maker does not fully live up to its name, holding a water volume of 0.8 liters. The Circolo model has a larger size with a water tank capacity of 1.3 liters and a weight of 3.7 kilograms. Melodi has similar dimensions. The model also has an exciting prize in the form of an LED illuminated cup stand. If we associate models by technical features, then we will not be able to find significant differences. The power of each is about 1400 W, the pump pressure is 13 bar, and the water is heated using a thermoblock. Despite the difference in size, design and cost, manufacturers promise the taste of the drink is comparable to “prepared by the hands of a professional barista in the best coffee shop in the city.”